Construction Specialties

Produtos EEquipamentos para Doca Seladores/abrigos para docas

V Seal Dock Seal

		Is designed with a unique "V" shaped side pad that provides "2-sided sealing". This dock seal seals the gap between trailer walls and swing out doors. The "V" seal seals on the outside surface of the swing door and on the edge of the trailer door hinge. This soft, compression foam surface conforms to the hinge gap area while providing better access to the trailer's interior.
		Seals completely without air gaps
		Seals hinge gap
		Provides better access to trailer interior
		Heavy-duty steel I-beams prevent off-center trailer damage to the building.

WearMaster Head Pad

		Is designed to move vertically with air ride suspension trailers and withstand abusive yard-jockey applications at the busiest loading docks.
		Innovative two piece moveable head pad and wear pleat system that reduces abrasive wear on the face of the side pads and head pad.
		All framing is roll formed galvanized steel which reduces the amount of pressure on the building wall.
		Includes full wide head pad wear face and full length 4" exposure wear pleats made of Tufseal's exclusive TS-55 super fabric.
		All fabrics including the urethane coated base fabric are attached to the framing with TEK screws inserted through load spreading washers for superior mounting strength.
		All units also include full length guide stripes and inside bottom flaps.

Serco S-600 Stationary Head Pad Dock Seal

		The Serco S-600 Stationary Head Pad Dock Seal is typically ideal for smaller doors (9' by 9' or less). The S-600 seals automatically as the trailer is backed against the foam pads.
		Roll-formed galvanized steel framing warranted for 5 years against rotting, splitting or cracking
		Endurance-tested foam core is continuously bonded to frame surface with flexible, non-flammable adhesive
		A wide selection of durable coated fabrics provides maximum durability

Serco S-700 Head Curtain Dock Seal

		The Serco S-700 Head Curtain Dock Seal will accommodate a variety of trailer heights and is designed for doors that are 9' tall or over.
		Roll-formed galvanized steel framing warranted for 5 years against rotting, splitting or cracking
		Endurance-tested foam core is continuously bonded to frame surface with flexible, non-flammable adhesive
		A wide selection of durable coated fabrics provides maximum durability
		Adjustable head curtain option

		The S-800 Adjustable Head Pad Dock Seal can be manually positioned within a 48" range and is an excellent choice for sealing a full range of trailer heights.
		Patented, adjustable head pad system operates utilizing an easy-release lever
		Adjustable spring-tension system provides for adjustment of counterbalance and horizontal tilt for smooth, jam-free operation
		18" high foam head pad is mounted on a steel pan which travels in slide tracks
		Roll-formed galvanized steel framing (5-year warranty)
		Highly resilient foam core protected by three layers of durable coated fabric
		A wide selection of durable coated fabrics provides maximum durability

Ultra-Seal

		Unique design Insulates like a seal
		Provides access to truck like a shelter
		Dual guide stripes for 96" and 102" wide trucks
		Pleats on head corners and reinforced bottom corners
		No hardware in door opening
		Minimal projection beyond bumpers (6’ recommended)
		Versatile mounting for 8’ W x 8’ H and up to 10’ W x 10’ H opening sizes.

Brasil: Ave. Pres. Carlos Luz, 3001 Loja 2000 . Belo Horizonte – MG CEP: 31250-010 . Escritorio : + 55 3415 6154

U.S.A. : 1952 South Price Road Brownsville, TX 78521 . Ph: (956) 504-0450 / 504-0548 (U.S.A.) Fax: (956) 504-0617 (U.S.A.)