Republic´s DM series doors are available in 18 or 20 gauge cold rolled steel or galvanealed (A60) steel. Republic´s "McKenzie Edge" lock edge is continuously lap seam welded and planished, providing a near seamless appearance - SDI levels 1 and 2 - Physical performance level A.
1 ¾" (44.4) full flush design, rated for light to extra heavy-duty use
¾" (19) cell honeycomb core 100% bonded to skins to provide exceptional strength and flatness
Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5" on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16" (5) of total reinforcement
16 gauge flush top and inverted bottom channels projection welded to both skins every 2 ½" on center
Doors are prepared for 4 ½" standard or heavy weight, full mortise template hinges
Non-handed design (square lock edge)
Come standard with 1 ½ hour mylar Underwriters Laboratories fire label
Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
Doors are individually packaged and fully plastic wrapped to prevent damage
LOCK PREPARATION
1-3/4"(44) Doors
Cylindrical, Gov't 161
ANSI 115.2
Mortise, Gov't 86
ANSI 115.1
1-3/8"(35) Doors
Cylindrical, Gov't 161
ANSI 115.3
Other lock preparations available when specified
HINGE PREPARATION
1-3/4"(44) Doors
4-1/2"(114) standard/heavy weight template hinges.1-1/2 pair on 6'8" (2032), 7'0"(2134) and 7'2"(2184) doors. 2 pair on doors over 7'6"(2286).
1-3/8"(35) Doors
3-1/2"(89) standard weight template hinges.
1-1/2 pair on 7'0"(2134) and 7'2"(2184) doors. 1 pair on 6'8"(2032) doors.
(1-1/2 pair on 6'8"(2032) fire rated doors).
NOTE: When Government Series 86 lock is used (ANSI A115.1) dimension to center of lock is 3/8"(10) less
than indicated.
